Here’s the finished product, I’ll share with you exactly how I made her below, complete with a free pdf download pattern for the arms, feet, bow and side panels.
Figuring out how to make the handle look like pearls was the most interesting challenge. The rest is just rectangles cut to easy dimensions.
- Free downloadable handbag_harriet_pattern.pdf
- Blue polar fleece (3/8 yard – I was so inexact I really didn’t pay attention here)
- Contrasting polar fleece for liner
- Scrap white polar fleece – 19″ x 4″
- Scrap pink (or any color you choose) for the bow
- Stuffing for “pearl” handle
- White yarn to tie off pearls in pearl handle
- Handbag Harriet face embroidery design (we used the 5″x7″ version) & thread
- Cut 2 rectangles (front and back of the handbag) in baby blue fleece: 8.5″ x 11″
- Cut 2 rectangles (for inside liner) in contrasting fleece: 8.5″ x 11″
Why did I choose 8.5″ x 11″? because it was easy. I could use a plain sheet of paper for my template size. and it seemed like a good size to make a nice big face using my 5×7 embroidery loom. you can go smaller or larger if you want. there really are no rules here. Just make sure you change the sizing of the bottom & side panels accordingly.
- Using the pattern pdf, cut arms, feet, and side panels.
- Feet (Cut 4)
- Arms (Cut 4)
- Side (cut 2 outside fabric) (cut 2 liner fabric)
The side panels are simply trapezoids. the bottom is 3″ wide and the top is 1.5″ wide. the height is 8.5″ . You can change these dimensions to be wider or just 3″ wide rectangles. Whatever works best for you.
*Note how un-perfect my shapes are. This project should not be stressful; you don’t have to be perfect in any way. Your sewing machine will round out corners for you, and extra fleece when you match up edges is easily trimmed.
- Cut a blue bottom panel: 3″ wide by 11″ long
- Cut a contrasting liner bottom panel: 3″wide by 11″ long
- Cut a piece of pink scrap in the shape of a bow. Give the bow a longer center – that’s to let you tie a knot in the middle to make it more 3 dimensional.
- Get ready to make your “pearl” handle by cutting a long strip of white polar fleece, about 4″ wide and 19″ long
Step 2: adding the face
Embroider the face on one light blue panel using this embroidery pattern. (this tutorial uses the 5″x7″ version) Giggle at how cute. set aside for now.
Step 3: put it together
You are basically sewing a box shape. If this kind of project is new to you, it will be easier to do the liner first.
Now the Handle
You’ll notice in this picture of Handbag Harriet, she has what looks to be a pearl handle. How to get that effect while still keeping this soft for little ones and not using anything expensive? Here’s my solution.
Fill tube with stuffing from right side. Tie very tight double knots every 1 inch. You’ll see the pearl look begin to appear. Leave 3 inches on right side, un-stuffed, matching the left side. These flat 3 inches will be what you sew into the top seam of the handbag later. Cut your yarn very close to the knots.
Tie the bow
Sew the hands and feet
Sew hands and feet together. Leave a space (at the top on the feet, and on the arms leave one whole side) to allow you to turn these right side out. no need to sew the holes shut once turned right side out. The open part will be laid inside the seam of the purse and be naturally sewn shut.
Now it’s coming together!
These next steps will be familiar to you from sewing the lining. (Aren’t you glad you practiced with that first?) Lay your side panels face down along the side, over the arms and face. You’ll notice this is the second time I bother to pin. that’s to keep the arms in place when I sew.
Sew straight down the sides, this will also close the open seam on the arms. Cut off excess arms when done.
Now we come to the feet
Place the unstitched section below the bottom of the face panel. As you place the feet, slightly cross one over the other. The final effect is like a cute little character crossing her feet. Lay your bottom panel face down, pin and stitch along the bottom. You will be sewing through 8 layers of fleece at one point, so take your time here. Now use your experience in making the liner to piece and sew the back panel to the sides and bottom.
Add the bow
Place the handle
Pin the liner in place
With your face layer RIGHT SIDE OUT and your liner layer INSIDE OUT, place your face layer, with the handle pinned to the side panels, inside the liner. As you pin the liner to the face layer, you will have to tuck the bow in
to be sure it doesn’t get caught up in the top seam. When you sew around the top you will be sewing 3 layers: Face layer, Handles, and liner, all with one clean seam.
Turn everything right side out
Top-stitch that little hole shut before you finish tucking in the liner.
Well Played! You made a handbag to hold all those little Shopkins, and anything else your little girl wants to carry around in her new fancy bag.